[RFC PATCH 0/5] at91: move reset vector to board code

[Sam Ravnborg]

The following patchset is the start to move the reset vector
for at91 boards from mach-at91 to boards code.
This is similar to what other boards do and is done to prepare
for multi-image support and DT support.

The patchset convert a few boards already and I am aiming to convert
all boards, but wanted feedback on the patch set before starting to do so.

The first patch have minimal impact, but prepares for a
board-by-board conversion.

The patch-set includes the conversion of the boards:
at91sam9261ek
at91sam9263ek
pm9261
at91sam9g10ek

When all boards are converted then there will be no files
named arch/arm/mach-at91/*lowlevel_init.c
And all CONFIG symbols named *_LWL will be no more.

The patchset was successfully booted on a AT91SAM9263EK,
and all defconfigs was built (expect the ones that failed
to build before this patchset was applied).

Note: the patches are from ***@skov.dk - in the next round
I will change this to my home address as this is not work related.

Sam


Sam Ravnborg (5):
at91: refactor lowlevel_init selection
at91: drop unused at91sam9x5_lowlevel_init.c
at91sam9263ek: move reset vector to board code
at91sam9261ek, at91sam9g10ek: move reset vector to board code
pm9261: move reset vector to board code


arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 ++++++++---
arch/arm/boards/at91sam9263ek/Makefile | 2 +-
arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 +++++++++---
arch/arm/boards/mmccpu/Makefile | 2 +-
arch/arm/boards/pm9261/Makefile | 2 +-
arch/arm/boards/pm9261/lowlevel_init.c | 39 ++++++++---
arch/arm/boards/pm9263/Makefile | 2 +-
arch/arm/boards/tny-a926x/Makefile | 8 +--
arch/arm/boards/usb-a926x/Makefile | 6 +-
arch/arm/mach-at91/Kconfig | 72 +++++++++++++++----
arch/arm/mach-at91/Makefile | 23 +++----
arch/arm/mach-at91/at91sam9x5_lowlevel_init.c | 26 -------
arch/arm/mach-at91/include/mach/at91_lowlevel_init.h | 2 +-
arch/arm/mach-at91/include/mach/at91sam926x_board_init.h | 220 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
15 files changed, 392 insertions(+), 98 deletions(-)

[Sam Ravnborg]

From e8753cfcadd7b32e304b5d98e6429392c197852e Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <***@skov.dk>
Date: Wed, 5 Jul 2017 19:54:40 +0200
Subject: [PATCH 1/5] at91: refactor lowlevel_init selection

Push selection of lowlevel_init functions out to the individual
boards.
Pushing it to the individual boards allows us on a per board basis
to migrate to a design where the mach-at91 code no longer
calls the board specific code.

When the dependency mach-at91 => boards is dropped for
a board the migration to a multi-image setup is one step closer.

Signed-off-by: Sam Ravnborg <***@ravnborg.org>
---
arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9263ek/Makefile | 2 +-
arch/arm/boards/mmccpu/Makefile | 2 +-
arch/arm/boards/pm9261/Makefile | 2 +-
arch/arm/boards/pm9263/Makefile | 2 +-
arch/arm/boards/tny-a926x/Makefile | 8 +--
arch/arm/boards/usb-a926x/Makefile | 6 +-
arch/arm/mach-at91/Kconfig | 81 ++++++++++++++++++----
arch/arm/mach-at91/Makefile | 24 +++----
.../mach-at91/include/mach/at91_lowlevel_init.h | 2 +-
10 files changed, 91 insertions(+), 40 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/Makefile b/arch/arm/boards/at91sam9261ek/Makefile
index 1764da93f..667095ae4 100644
--- a/arch/arm/boards/at91sam9261ek/Makefile
+++ b/arch/arm/boards/at91sam9261ek/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-$(CONFIG_AT91SAM926X_LWL) += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9261ek
diff --git a/arch/arm/boards/at91sam9263ek/Makefile b/arch/arm/boards/at91sam9263ek/Makefile
index 2072cd416..de4d75690 100644
--- a/arch/arm/boards/at91sam9263ek/Makefile
+++ b/arch/arm/boards/at91sam9263ek/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9263ek
diff --git a/arch/arm/boards/mmccpu/Makefile b/arch/arm/boards/mmccpu/Makefile
index 1398c26a0..a34efd541 100644
--- a/arch/arm/boards/mmccpu/Makefile
+++ b/arch/arm/boards/mmccpu/Makefile
@@ -1,3 +1,3 @@
obj-y += init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-n += lowlevel_init.o
diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
index bff467b1d..e9bf1212f 100644
--- a/arch/arm/boards/pm9261/Makefile
+++ b/arch/arm/boards/pm9261/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-pm9261
diff --git a/arch/arm/boards/pm9263/Makefile b/arch/arm/boards/pm9263/Makefile
index 1398c26a0..68bfbfa92 100644
--- a/arch/arm/boards/pm9263/Makefile
+++ b/arch/arm/boards/pm9263/Makefile
@@ -1,3 +1,3 @@
obj-y += init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += lowlevel_init.o
+lwl-y += lowlevel_init.o
diff --git a/arch/arm/boards/tny-a926x/Makefile b/arch/arm/boards/tny-a926x/Makefile
index dba2f8cfc..5dee09a11 100644
--- a/arch/arm/boards/tny-a926x/Makefile
+++ b/arch/arm/boards/tny-a926x/Makefile
@@ -1,9 +1,7 @@
obj-y += init.o

-bootstrap-$(CONFIG_MACH_TNY_A9263) = tny_a9263_bootstrap.o
-obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+obj-$(CONFIG_AT91_BOOTSTRAP) += tny_a9263_bootstrap.o

-lowlevel_init-$(CONFIG_MACH_TNY_A9263) = tny_a9263_lowlevel_init.o
-
-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y)
+# Not used, documented by an -n assignment
+lwl-n += tny_a9263_lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-tny-a926x
diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
index 4f09581e3..a4eae1844 100644
--- a/arch/arm/boards/usb-a926x/Makefile
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -1,9 +1,7 @@
obj-y += init.o

-bootstrap-$(CONFIG_MACH_USB_A9263) = usb_a9263_bootstrap.o
-obj-$(CONFIG_AT91_BOOTSTRAP) += $(bootstrap-y)
+obj-$(CONFIG_AT91_BOOTSTRAP) += usb_a9263_bootstrap.o

-lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM926X_LWL) += usb_a9263_lowlevel_init.o

-lwl-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) += $(lowlevel_init-y)
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-usb-a926x
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9db53b226..37907b217 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -29,7 +29,33 @@ config HAVE_AT91_H32MX
config HAVE_AT91_GENERATED_CLK
bool

-config HAVE_AT91_LOWLEVEL_INIT
+# Select if board support bootstrap
+config HAVE_AT91_BOOTSTRAP
+ bool
+
+# Select is board uses the common at91sam926x_lowlevel_init
+config AT91SAM926X_LWL
+ bool
+
+# Select if board uses barebox reset vector from mach-at91
+# as implemented in the *lowlevel_init.c files
+config AT91SAM9260_LWL
+ bool
+config AT91SAM9261_LWL
+ bool
+config AT91SAM9263_LWL
+ bool
+config AT91SAM9G45_LWL
+ bool
+config AT91SAM9X5_LWL
+ bool
+config AT91SAM9N12_LWL
+ bool
+config AT91RM9200_LWL
+ bool
+config SAMA5D3_LWL
+ bool
+config SAMA5D4_LWL
bool

config AT91SAM9_SMC
@@ -71,9 +97,6 @@ config AT91SAM9G45_RESET
config HAVE_AT91_LOAD_BAREBOX_SRAM
bool

-config AT91SAM9_LOWLEVEL_INIT
- bool
-
comment "Atmel AT91 System-on-Chip"

config SOC_AT91RM9200
@@ -88,7 +111,6 @@ config SOC_AT91SAM9260
select HAVE_AT91_DBGU0
select HAS_MACB
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
@@ -98,7 +120,6 @@ config SOC_AT91SAM9261
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.

@@ -108,7 +129,6 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAS_MACB
select AT91SAM9_RESET
- select AT91SAM9_LOWLEVEL_INIT
select HAVE_AT91_LOAD_BAREBOX_SRAM

config SOC_AT91SAM9G45
@@ -239,6 +259,7 @@ choice
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
+ select AT91RM9200_LWL
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
@@ -256,15 +277,18 @@ choice

config MACH_ANIMEO_IP
bool "Somfy Animeo IP"
+ select AT91SAM9260_LWL

config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9260_LWL
help
Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board

config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
@@ -272,6 +296,7 @@ config MACH_QIL_A9260
config MACH_TNY_A9260
bool "CALAO TNY-A9260"
select SUPPORT_CALAO_MOB_TNY_MD2
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems TNY-A9260.
<http://www.calao-systems.com>
@@ -279,12 +304,14 @@ config MACH_TNY_A9260
config MACH_USB_A9260
bool "CALAO USB-A9260"
select SUPPORT_CALAO_DAB_MMX
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>

config MACH_GE863
bool "Telit EVK-PRO3"
+ select AT91SAM9260_LWL
help
Say y here if you are using Telit EVK-PRO3 with GE863-PRO3
<http://www.telit.com>
@@ -305,7 +332,9 @@ config MACH_AT91SAM9261EK
select HAS_DM9000
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9261_LWL
+ select AT91SAM926X_LWL
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -313,7 +342,9 @@ config MACH_AT91SAM9261EK
config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9261_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using the Ronetix PM9261 Board

@@ -332,6 +363,7 @@ config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAS_DM9000
+ select AT91SAM9261_LWL
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -350,6 +382,7 @@ choice
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9260_LWL
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
@@ -357,6 +390,7 @@ config MACH_AT91SAM9G20EK
config MACH_TNY_A9G20
select SUPPORT_CALAO_MOB_TNY_MD2
bool "CALAO TNY-A9G20"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems TNY-A9G20.
<http://www.calao-systems.com>
@@ -364,6 +398,7 @@ config MACH_TNY_A9G20
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
select SUPPORT_CALAO_DAB_MMX
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
@@ -371,18 +406,21 @@ config MACH_USB_A9G20
config MACH_DSS11
bool "aizo dSS11"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9260_LWL
help
Select this if you are using aizo dSS11
that embeds only one SD/MMC slot.

config MACH_QIL_A9G20
bool "CALAO QIL-A9G20 board"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems QIL-A9G20 Board.
<http://www.calao-systems.com>

config MACH_HABA_KNX_LITE
bool "CALAO HABA-KNX-LITE"
+ select AT91SAM9260_LWL
help
Select this if you are using a Calao Systems HABA-KNX-LITE.
<http://www.calao-systems.com>
@@ -399,32 +437,41 @@ choice

config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK"
- select HAVE_AT91_LOWLEVEL_INIT
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board

config MACH_MMCCPU
bool "Bucyrus MMC-CPU"
+ select AT91SAM9263_LWL
help
Say y here if you are using the Bucyrus MMC-CPU

config MACH_PM9263
bool "Ronetix PM9263"
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Say y here if you are using the Ronetix PM9263 Board

config MACH_TNY_A9263
bool "CALAO TNY-A9263"
select SUPPORT_CALAO_MOB_TNY_MD2
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
help
Select this if you are using a Calao Systems TNY-A9263.
<http://www.calao-systems.com>

config MACH_USB_A9263
bool "CALAO USB-A9263"
- select HAVE_AT91_LOWLEVEL_INIT
+ select HAVE_AT91_BOOTSTRAP
+ select AT91SAM9263_LWL
+ select AT91SAM926X_LWL
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
@@ -440,12 +487,14 @@ choice

config MACH_AT91SAM9M10IHD
bool "Atmel AT91SAM9M10IDH Tablet"
+ select AT91SAM9G45_LWL
help
Select this if you are using Atmel's AT91SAM9M10IHD Tablet

config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
+ select AT91SAM9G45_LWL
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit
or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD)
@@ -453,6 +502,7 @@ config MACH_AT91SAM9M10G45EK

config MACH_PM9G45
bool "Ronetix PM9G45"
+ select AT91SAM9G45_LWL
help
Say y here if you are using the Ronetix PM9G45 Board

@@ -469,6 +519,7 @@ choice

config MACH_AT91SAM9N12EK
bool "Atmel AT91SAM9N12 Evaluation Kit"
+ select AT91SAM9N12_LWL
help
Select this if you are using Atmel's AT91SAM9N12-EK Evaluation Kit.

@@ -485,11 +536,13 @@ choice

config MACH_SAMA5D3XEK
bool "Atmel SAMA5D3X Evaluation Kit"
+ select SAMA5D3_LWL
help
Select this if you are using Atmel's SAMA5D3X-EK Evaluation Kit.

config MACH_SAMA5D3_XPLAINED
bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
+ select SAMA5D3_LWL
help
Select this if you are using Atmel's SAMA5D3_XPLAINED Evaluation Kit.

@@ -506,11 +559,13 @@ choice

config MACH_SAMA5D4EK
bool "Atmel SAMA5D4 Evaluation Kit"
+ select SAMA5D4_LWL
help
Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit.

config MACH_SAMA5D4_XPLAINED
bool "Atmel SAMA5D4 XPLAINED ULTRA Evaluation Kit"
+ select SAMA5D4_LWL
help
Select this if you are using Atmel's SAMA5D4_XPLAINED ULTRA Evaluation Kit.

@@ -595,7 +650,7 @@ config CALAO_MB_QIL_A9260

config AT91_BOOTSTRAP
bool "at91 bootstrap"
- depends on HAVE_AT91_LOWLEVEL_INIT
+ depends on HAVE_AT91_BOOTSTRAP
select BOOTSTRAP

config AT91_LOAD_BAREBOX_SRAM
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 0892fb4b5..5516b5f4f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,18 +7,18 @@ endif
obj-$(CONFIG_CMD_AT91_BOOT_TEST) += boot_test_cmd.o

obj-$(CONFIG_AT91_BOOTSTRAP) += bootstrap.o
-sam926x_lowlevel_init-$(CONFIG_AT91SAM9_LOWLEVEL_INIT) = at91sam926x_lowlevel_init.o
-lowlevel_init-$(CONFIG_HAVE_AT91_LOWLEVEL_INIT) = $(sam926x_lowlevel_init-y)
-lowlevel_init-$(CONFIG_SOC_AT91SAM9260) += at91sam9260_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9261) += at91sam9261_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9263) += at91sam9263_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5_lowlevel_init.o
-lowlevel_init-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_SAMA5D3) += sama5d3_lowlevel_init.o
-lowlevel_init-$(CONFIG_ARCH_SAMA5D4) += sama5d3_lowlevel_init.o
-lwl-y += $(lowlevel_init-y)
+
+lwl-$(CONFIG_AT91SAM926X_LWL) += at91sam926x_lowlevel_init.o
+
+lwl-$(CONFIG_AT91SAM9260_LWL) += at91sam9260_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9261_LWL) += at91sam9261_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9263_LWL) += at91sam9263_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9G45_LWL) += at91sam9g45_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9X5_LWL) += at91sam9x5_lowlevel_init.o
+lwl-$(CONFIG_AT91SAM9N12_LWL) += at91sam9n12_lowlevel_init.o
+lwl-$(CONFIG_AT91RM9200_LWL) += at91rm9200_lowlevel_init.o
+lwl-$(CONFIG_SAMA5D3_LWL) += sama5d3_lowlevel_init.o
+lwl-$(CONFIG_SAMA5D4_LWL) += sama5d3_lowlevel_init.o

obj-$(CONFIG_AT91SAM9_RESET) += at91sam9_reset.o
obj-$(CONFIG_AT91SAM9G45_RESET) += at91sam9g45_reset.o
diff --git a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
index 6b37e49e9..d72dfff38 100644
--- a/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
+++ b/arch/arm/mach-at91/include/mach/at91_lowlevel_init.h
@@ -35,7 +35,7 @@ struct at91sam926x_lowlevel_cfg {
u32 rstc_rmr;
};

-#ifdef CONFIG_HAVE_AT91_LOWLEVEL_INIT
+#ifdef CONFIG_AT91SAM926X_LWL
void at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg);
void at91sam926x_lowlevel_init(struct at91sam926x_lowlevel_cfg *cfg);
#else

[Sam Ravnborg]

From 16ac2a9920e86b704abe617982ce42e06bb1d70e Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <***@skov.dk>
Date: Wed, 5 Jul 2017 20:07:09 +0200
Subject: [PATCH 2/5] at91: drop unused at91sam9x5_lowlevel_init.c

After the refactoring of how we select lowlevel_init
it was easy to see that at91sam9x5_lowlevel_init.c was no
longer used.
Delete the file and the now unused CONFIG symbol and it uses

Signed-off-by: Sam Ravnborg <***@ravnborg.org>
---
arch/arm/mach-at91/Kconfig | 2 --
arch/arm/mach-at91/Makefile | 1 -
arch/arm/mach-at91/at91sam9x5_lowlevel_init.c | 26 --------------------------
3 files changed, 29 deletions(-)
delete mode 100644 arch/arm/mach-at91/at91sam9x5_lowlevel_init.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 37907b217..970ee07b1 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -47,8 +47,6 @@ config AT91SAM9263_LWL
bool
config AT91SAM9G45_LWL
bool
-config AT91SAM9X5_LWL
- bool
config AT91SAM9N12_LWL
bool
config AT91RM9200_LWL
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 5516b5f4f..f683d0f65 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -14,7 +14,6 @@ lwl-$(CONFIG_AT91SAM9260_LWL) += at91sam9260_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9261_LWL) += at91sam9261_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9263_LWL) += at91sam9263_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9G45_LWL) += at91sam9g45_lowlevel_init.o
-lwl-$(CONFIG_AT91SAM9X5_LWL) += at91sam9x5_lowlevel_init.o
lwl-$(CONFIG_AT91SAM9N12_LWL) += at91sam9n12_lowlevel_init.o
lwl-$(CONFIG_AT91RM9200_LWL) += at91rm9200_lowlevel_init.o
lwl-$(CONFIG_SAMA5D3_LWL) += sama5d3_lowlevel_init.o
diff --git a/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c b/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c
deleted file mode 100644
index 48e69f947..000000000
--- a/arch/arm/mach-at91/at91sam9x5_lowlevel_init.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2009-2013 Jean-Christophe PLAGNIOL-VILLARD <***@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#define __LOWLEVEL_INIT__
-
-#include <common.h>
-#include <asm/system.h>
-#include <asm/barebox-arm.h>
-#include <asm/barebox-arm-head.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/at91sam9_ddrsdr.h>
-#include <init.h>
-#include <linux/sizes.h>
-
-void __naked __bare_init barebox_arm_reset_vector(void)
-{
- arm_cpu_lowlevel_init();
-
- arm_setup_stack(AT91SAM9X5_SRAM_BASE + AT91SAM9X5_SRAM_SIZE - 16);
-
- barebox_arm_entry(AT91_CHIPSELECT_1, at91sam9x5_get_ddram_size(), NULL);
-}

[Sam Ravnborg]

From 76460e67ea00acaf0ca61318bd39f2127632cb8c Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <***@skov.dk>
Date: Wed, 5 Jul 2017 22:13:30 +0200
Subject: [PATCH 3/5] at91sam9263ek: move reset vector to board code

Create a new file at91sam926x_board_init.h which
is a copy of at91sam926x_lowlevel_init.c with a few minor
adjustments:
- We no longer call board code from this function
- The struct is renamed to avoid name clashes
- the function is rename to better match the prurpose

This file will be used in subsequent transformations

Otherwise just added the reset vector to the board code
and drop the now obsolete CONFIG selectst

Signed-off-by: Sam Ravnborg <***@ravnborg.org>
---
arch/arm/boards/at91sam9263ek/lowlevel_init.c | 43 ++--
arch/arm/mach-at91/Kconfig | 2 -
.../include/mach/at91sam926x_board_init.h | 220 +++++++++++++++++++++
3 files changed, 252 insertions(+), 13 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91sam926x_board_init.h

diff --git a/arch/arm/boards/at91sam9263ek/lowlevel_init.c b/arch/arm/boards/at91sam9263ek/lowlevel_init.c
index 2f8b312d3..70e0da3b1 100644
--- a/arch/arm/boards/at91sam9263ek/lowlevel_init.c
+++ b/arch/arm/boards/at91sam9263ek/lowlevel_init.c
@@ -4,21 +4,17 @@
* Under GPLv2
*/

-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
+#include <linux/sizes.h>
+
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
+#include <mach/at91sam9263_matrix.h>

#define MASTER_PLL_MUL 171
#define MASTER_PLL_DIV 14

-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init at91sam9263ek_board_config(struct at91sam926x_board_cfg *cfg)
{
/* Disable Watchdog */
cfg->wdt_mr =
@@ -102,3 +98,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
AT91_RSTC_RSTTYP_WAKEUP |
AT91_RSTC_RSTTYP_WATCHDOG;
}
+
+static void __bare_init at91sam9263ek_init(void)
+{
+ struct at91sam926x_board_cfg cfg;
+
+ cfg.pio = IOMEM(AT91SAM9263_BASE_PIOD);
+ cfg.sdramc = IOMEM(AT91SAM9263_BASE_SDRAMC0);
+ cfg.ebi_pio_is_peripha = true;
+ cfg.matrix_csa = AT91_MATRIX_EBI0CSA;
+
+ at91sam9263ek_board_config(&cfg);
+ at91sam926x_board_init(&cfg);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+ NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9263_SRAM0_BASE + AT91SAM9263_SRAM0_SIZE - 16);
+
+ at91sam9263ek_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 970ee07b1..99a8fdeb2 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -437,8 +437,6 @@ config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK"
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAVE_AT91_BOOTSTRAP
- select AT91SAM9263_LWL
- select AT91SAM926X_LWL
help
Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board

diff --git a/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h b/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h
new file mode 100644
index 000000000..11959ae07
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam926x_board_init.h
@@ -0,0 +1,220 @@
+#ifndef __AT91SAM926X_BOARD_INIT_H__
+#define __AT91SAM926X_BOARD_INIT_H__
+/*
+ * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
+ * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <***@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_pio.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_wdt.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+struct at91sam926x_board_cfg {
+ /* SoC specific */
+ void __iomem *pio;
+ void __iomem *sdramc;
+ u32 ebi_pio_is_peripha;
+ u32 matrix_csa;
+
+ /* board specific */
+ u32 wdt_mr;
+ u32 ebi_pio_pdr;
+ u32 ebi_pio_ppudr;
+ u32 ebi_csa;
+ u32 smc_cs;
+ u32 smc_mode;
+ u32 smc_cycle;
+ u32 smc_pulse;
+ u32 smc_setup;
+ u32 pmc_mor;
+ u32 pmc_pllar;
+ u32 pmc_mckr1;
+ u32 pmc_mckr2;
+ u32 sdrc_cr;
+ u32 sdrc_tr1;
+ u32 sdrc_mdr;
+ u32 sdrc_tr2;
+ u32 rstc_rmr;
+};
+
+
+static void inline access_sdram(void)
+{
+ writel(0x00000000, AT91_SDRAM_BASE);
+}
+
+static void inline pmc_check_mckrdy(void)
+{
+ u32 r;
+
+ do {
+ r = at91_pmc_read(AT91_PMC_SR);
+ } while (!(r & AT91_PMC_MCKRDY));
+}
+
+static int inline running_in_sram(void)
+{
+ u32 addr = get_pc();
+
+ addr >>= 28;
+ return addr == 0;
+}
+
+#define at91_sdramc_read(field) \
+ __raw_readl(cfg->sdramc + field)
+
+#define at91_sdramc_write(field, value) \
+ __raw_writel(value, cfg->sdramc + field)
+
+static void inline __bare_init at91sam926x_sdramc_init(struct at91sam926x_board_cfg *cfg)
+{
+ u32 r;
+ int i;
+ int in_sram = running_in_sram();
+
+ /*
+ * SDRAMC Check if Refresh Timer Counter is already initialized
+ */
+ r = at91_sdramc_read(AT91_SDRAMC_TR);
+ if (r && !in_sram)
+ return;
+
+ /* SDRAMC_MR : Normal Mode */
+ at91_sdramc_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL);
+
+ /* SDRAMC_TR - Refresh Timer register */
+ at91_sdramc_write(AT91_SDRAMC_TR, cfg->sdrc_tr1);
+
+ /* SDRAMC_CR - Configuration register*/
+ at91_sdramc_write(AT91_SDRAMC_CR, cfg->sdrc_cr);
+
+ /* Memory Device Type */
+ at91_sdramc_write(AT91_SDRAMC_MDR, cfg->sdrc_mdr);
+
+ /* SDRAMC_MR : Precharge All */
+ at91_sdramc_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_PRECHARGE);
+
+ /* access SDRAM */
+ access_sdram();
+
+ /* SDRAMC_MR : refresh */
+ at91_sdramc_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_REFRESH);
+
+ /* access SDRAM 8 times */
+ for (i = 0; i < 8; i++)
+ access_sdram();
+
+ /* SDRAMC_MR : Load Mode Register */
+ at91_sdramc_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_LMR);
+
+ /* access SDRAM */
+ access_sdram();
+
+ /* SDRAMC_MR : Normal Mode */
+ at91_sdramc_write(AT91_SDRAMC_MR, AT91_SDRAMC_MODE_NORMAL);
+
+ /* access SDRAM */
+ access_sdram();
+
+ /* SDRAMC_TR : Refresh Timer Counter */
+ at91_sdramc_write(AT91_SDRAMC_TR, cfg->sdrc_tr2);
+
+ /* access SDRAM */
+ access_sdram();
+}
+
+static void inline __bare_init at91sam926x_board_init(struct at91sam926x_board_cfg *cfg)
+{
+ u32 r;
+ int in_sram = running_in_sram();
+
+ __raw_writel(cfg->wdt_mr, AT91_BASE_WDT + AT91_WDT_MR);
+
+ /* configure PIOx as EBI0 D[16-31] */
+ at91_mux_gpio_disable(cfg->pio, cfg->ebi_pio_pdr);
+ at91_mux_set_pullup(cfg->pio, cfg->ebi_pio_ppudr, true);
+ if (cfg->ebi_pio_is_peripha)
+ at91_mux_set_A_periph(cfg->pio, cfg->ebi_pio_ppudr);
+
+ at91_sys_write(cfg->matrix_csa, cfg->ebi_csa);
+
+ /* flash */
+ at91_smc_write(cfg->smc_cs, AT91_SAM9_SMC_MODE, cfg->smc_mode);
+
+ at91_smc_write(cfg->smc_cs, AT91_SMC_CYCLE, cfg->smc_cycle);
+
+ at91_smc_write(cfg->smc_cs, AT91_SMC_PULSE, cfg->smc_pulse);
+
+ at91_smc_write(cfg->smc_cs, AT91_SMC_SETUP, cfg->smc_setup);
+
+ /*
+ * PMC Check if the PLL is already initialized
+ */
+ r = at91_pmc_read(AT91_PMC_MCKR);
+ if (r & AT91_PMC_CSS && !in_sram)
+ return;
+
+ /*
+ * Enable the Main Oscillator
+ */
+ at91_pmc_write(AT91_CKGR_MOR, cfg->pmc_mor);
+
+ do {
+ r = at91_pmc_read(AT91_PMC_SR);
+ } while (!(r & AT91_PMC_MOSCS));
+
+ /*
+ * PLLAR: x MHz for PCK
+ */
+ at91_pmc_write(AT91_CKGR_PLLAR, cfg->pmc_pllar);
+
+ do {
+ r = at91_pmc_read(AT91_PMC_SR);
+ } while (!(r & AT91_PMC_LOCKA));
+
+ /*
+ * PCK/x = MCK Master Clock from SLOW
+ */
+ at91_pmc_write(AT91_PMC_MCKR, cfg->pmc_mckr1);
+
+ pmc_check_mckrdy();
+
+ /*
+ * PCK/x = MCK Master Clock from PLLA
+ */
+ at91_pmc_write(AT91_PMC_MCKR, cfg->pmc_mckr2);
+
+ pmc_check_mckrdy();
+
+ /*
+ * Init SDRAM
+ */
+ at91sam926x_sdramc_init(cfg);
+
+ /* User reset enable*/
+ at91_sys_write(AT91_RSTC_MR, cfg->rstc_rmr);
+
+#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
+ /* MATRIX_MCFG - REMAP all masters */
+ at91_sys_write(AT91_MATRIX_MCFG0, 0x1FF);
+#endif
+ /*
+ * When boot from external boot
+ * we need to enable mck and ohter clock
+ * so enable all of them
+ * We will shutdown what we don't need later
+ */
+ at91_pmc_write(AT91_PMC_PCER, 0xffffffff);
+}
+
+#endif /* __AT91SAM926X_BOARD_INIT_H__ */

[Sam Ravnborg]

From 865c099363aac74310f6bacb7f6e0b1b290ecfc7 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <***@skov.dk>
Date: Wed, 5 Jul 2017 22:19:16 +0200
Subject: [PATCH 4/5] at91sam9261ek, at91sam9g10ek: move reset vector to board
code

The two evaluation boards share the same board code.

Drop obsolete select of CONFIG symbols
Simplify Makefile

Signed-off-by: Sam Ravnborg <***@ravnborg.org>
---
arch/arm/boards/at91sam9261ek/Makefile | 2 +-
arch/arm/boards/at91sam9261ek/lowlevel_init.c | 41 ++++++++++++++++++++-------
arch/arm/mach-at91/Kconfig | 3 --
3 files changed, 31 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boards/at91sam9261ek/Makefile b/arch/arm/boards/at91sam9261ek/Makefile
index 667095ae4..e7a9cde41 100644
--- a/arch/arm/boards/at91sam9261ek/Makefile
+++ b/arch/arm/boards/at91sam9261ek/Makefile
@@ -1,4 +1,4 @@
obj-y += init.o

-lwl-$(CONFIG_AT91SAM926X_LWL) += lowlevel_init.o
+lwl-y += lowlevel_init.o
bbenv-$(CONFIG_DEFAULT_ENVIRONMENT_GENERIC) += defaultenv-at91sam9261ek
diff --git a/arch/arm/boards/at91sam9261ek/lowlevel_init.c b/arch/arm/boards/at91sam9261ek/lowlevel_init.c
index 056584166..c4e4957ca 100644
--- a/arch/arm/boards/at91sam9261ek/lowlevel_init.c
+++ b/arch/arm/boards/at91sam9261ek/lowlevel_init.c
@@ -4,16 +4,10 @@
* Under GPLv2
*/

-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
-#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
+#include <mach/at91sam9261_matrix.h>

#define MASTER_CLOCK 200

@@ -25,7 +19,7 @@
#define MASTER_PLL_DIV 1
#endif

-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init at91sam9261ek_board_config(struct at91sam926x_board_cfg *cfg)
{
/* Disable Watchdog */
cfg->wdt_mr =
@@ -106,3 +100,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
AT91_RSTC_RSTTYP_WAKEUP |
AT91_RSTC_RSTTYP_WATCHDOG;
}
+
+static void __bare_init at91sam9261ek_init(void)
+{
+ struct at91sam926x_board_cfg cfg;
+
+ cfg.pio = IOMEM(AT91SAM9261_BASE_PIOC);
+ cfg.sdramc = IOMEM(AT91SAM9261_BASE_SDRAMC);
+ cfg.ebi_pio_is_peripha = false;
+ cfg.matrix_csa = AT91_MATRIX_EBICSA;
+
+ at91sam9261ek_board_config(&cfg);
+ at91sam926x_board_init(&cfg);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+ NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
+
+ at91sam9261ek_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 99a8fdeb2..6ae794f06 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -331,8 +331,6 @@ config MACH_AT91SAM9261EK
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAVE_AT91_BOOTSTRAP
- select AT91SAM9261_LWL
- select AT91SAM926X_LWL
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -361,7 +359,6 @@ config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_NAND_ATMEL_BUSWIDTH_16
select HAS_DM9000
- select AT91SAM9261_LWL
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>

[Sam Ravnborg]

From 75592860c696b241ee788f19ea7708628636cef9 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <***@skov.dk>
Date: Wed, 5 Jul 2017 22:27:43 +0200
Subject: [PATCH 5/5] pm9261: move reset vector to board code

Signed-off-by: Sam Ravnborg <***@ravnborg.org>
---
arch/arm/boards/pm9261/lowlevel_init.c | 39 +++++++++++++++++++++++++---------
arch/arm/mach-at91/Kconfig | 2 --
2 files changed, 29 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boards/pm9261/lowlevel_init.c b/arch/arm/boards/pm9261/lowlevel_init.c
index 91a64b415..a4cb8af69 100644
--- a/arch/arm/boards/pm9261/lowlevel_init.c
+++ b/arch/arm/boards/pm9261/lowlevel_init.c
@@ -4,22 +4,16 @@
* Under GPLv2
*/

-#include <common.h>
-#include <init.h>
-#include <mach/hardware.h>
-#include <mach/at91_rstc.h>
-#include <mach/at91_wdt.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9_sdramc.h>
+#include <asm/barebox-arm.h>
+
+#include <mach/at91sam926x_board_init.h>
#include <mach/at91sam9_matrix.h>
-#include <mach/at91_lowlevel_init.h>

#define MASTER_PLL_DIV 15
#define MASTER_PLL_MUL 162
#define MAIN_PLL_DIV 2

-void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
+static void __bare_init pm9261_board_config(struct at91sam926x_board_cfg *cfg)
{
/* Disable Watchdog */
cfg->wdt_mr =
@@ -100,3 +94,28 @@ void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_c
AT91_RSTC_RSTTYP_WAKEUP |
AT91_RSTC_RSTTYP_WATCHDOG;
}
+
+static void __bare_init pm9261_init(void)
+{
+ struct at91sam926x_board_cfg cfg;
+
+ cfg.pio = IOMEM(AT91SAM9261_BASE_PIOC);
+ cfg.sdramc = IOMEM(AT91SAM9261_BASE_SDRAMC);
+ cfg.ebi_pio_is_peripha = false;
+ cfg.matrix_csa = AT91_MATRIX_EBICSA;
+
+ pm9261_board_config(&cfg);
+ at91sam926x_board_init(&cfg);
+
+ barebox_arm_entry(AT91_CHIPSELECT_1, at91_get_sdram_size(cfg.sdramc),
+ NULL);
+}
+
+void __naked __bare_init barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+
+ arm_setup_stack(AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 16);
+
+ pm9261_init();
+}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6ae794f06..3e41fe70d 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -339,8 +339,6 @@ config MACH_PM9261
bool "Ronetix PM9261"
select HAS_DM9000
select HAVE_AT91_BOOTSTRAP
- select AT91SAM9261_LWL
- select AT91SAM926X_LWL
help
Say y here if you are using the Ronetix PM9261 Board